- Posts: 59
- Thank you received: 2
This is a public forum thread open to all users
RYE252R windscreen surround rust
9 years 1 week ago #37861
by Mark
RYE252R windscreen surround rust was created by Mark
Sorry if this appears twice!!
Finally managed to spend some more time stripping down, front suspension, bumpers, rad and brake callipers off, wiring loom to the front stripped back to the bulkhead, front lights off. Stripped out half the dash and finally got round to the bit I was dreading and got the windscreen out. The old screen had started to de-laminate at the top corners, managed to get the chrome strip off without damage and then it was down to a large hammer my boot.
Unfortunately discovered the surround is in a very bad way, anybody repaired one as bad as this or is to too far gone?
Finally managed to spend some more time stripping down, front suspension, bumpers, rad and brake callipers off, wiring loom to the front stripped back to the bulkhead, front lights off. Stripped out half the dash and finally got round to the bit I was dreading and got the windscreen out. The old screen had started to de-laminate at the top corners, managed to get the chrome strip off without damage and then it was down to a large hammer my boot.
Unfortunately discovered the surround is in a very bad way, anybody repaired one as bad as this or is to too far gone?
9 years 1 week ago #37862
by Michael
Replied by Michael on topic RYE252R windscreen surround rust
I can help you with that a very good original windscreen surround only got the small picture below of the worst bit pm me if you are interested
8 years 10 months ago #38260
by Mark
Replied by Mark on topic RYE252R windscreen surround rust
Finally got round to repairing my windscreen surround, got a very good replacement surround from Michael and fortunately it was almost totally seperated which saved a lot of time. I was dreading doing this as I had never done any welding before, but actually turned out to be easier than I expected.
Time to get the car upside down, anybody selling a rotisserie? If not I have found a place in Bolton that makes them to suit.
Time to get the car upside down, anybody selling a rotisserie? If not I have found a place in Bolton that makes them to suit.
- David Fisher
-
- Offline
- Premium Member
-
Less
More
- Posts: 153
- Thank you received: 47
8 years 10 months ago - 8 years 10 months ago #38262
by David Fisher
Replied by David Fisher on topic RYE252R windscreen surround rust
As it happens Mark I do have a rotisserie I've finished with, I had my car up on it for a little over two years. If your interested PM.
Dave
Dave
Last edit: 8 years 10 months ago by David Fisher.
Please Log in or Create an account to join the conversation.
- Andrew Sinclair
-
- Offline
- Elite Member
-
Less
More
- Posts: 261
- Thank you received: 17
8 years 9 months ago #38299
by Andrew Sinclair
Replied by Andrew Sinclair on topic RYE252R windscreen surround rust
Nice work with the screen surround, Mark. That rust looked scary. Especially there. It needs all the strength it can get.
Please Log in or Create an account to join the conversation.
Time to create page: 0.179 seconds