Does any one know what the bearings are for the two throttle shafts? The grey plastic seals seem available and some nylon bushes but I am not sure.
Also, a coincidence. My carburettor was sticking after lifting off resulting in a fast idle at lights. A blip would re set it. A friend down here in Cornwall had the same problem. I looked online and used ptfe spray around the shafts but also put redX in the petrol. it seems to be cured now. I am wondering if the ethanol in modern petrol could be to blame?
Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.
