Steering wheel

Does anyone know if a mono steering wheel will fit a x1/9 boss. I'm on the look out for a 13 inch steering wheel if anyone has one
Cheers

You can buy the boss, I fitted a OMP dished wheel on mine (for more knee to hand clearance when turning), unfortunately it was a while ago but I am guessing I bought it through eBay.

Thanks John

I have a boss for a montney wheel if that helps

Thanks Micheal I will bear that in mind, still on the lookout for 13" steering wheel just to give me that little bit of extra room when getting in car.

Have you done the steering wheel modification

Don't really know what that is ?

Okay
Go to the steering column and loosen the cover and remove
There is two bolts at the front with a thin metal bracket to hole the steering column slightly loosen these
Remove the rear bolt and then replace but pack the area between the steering column and the metal of the car within some washers thus will lift the front of the steering wheel tighten up and replace the plastic bits job done. This will give you about an inch of lift on the steering wheel

Thanks Micheal I will give it a go

Few little modifications I have managed to achieve, smaller steering wheel using adapter and modification to boss. Also shortened gear stick to give better feel.