This is a public forum thread open to all users

Would these fit?

More
11 years 10 months ago #32633 by rocco gregori
Hello all, many moons ago on a car i now do not own..., i ran 185/60/13 tyres on my stock 3 spoke x1/9 wheels, the car came with them and large wheel spacers (about 20-25mm i reckon as they were the type where you screw an adaptor into the bolt thread and then screw the wheel bolts in to them.)

they only scrapped a little on front wheel arches on full lock reversing down a slope...

So with this all in mind, would these wheels fit a stock 1500cc x1/9?

www.bielstein.com/rare-new/new-releases/wheel-rim-7-x-13-et-10


thx all.

Please Log in or Create an account to join the conversation.

More
11 years 10 months ago #32634 by Speedy Fiat
Replied by Speedy Fiat on topic Would these fit?
Somebody may correct me but I think your biggest issue will not be clearance on the wheel arches but on the springs. I run 205 tyres on 7 x 13 rims (not sure the offset without checking) and to fit them under the standard wheel arches you have to go to springs with a narrower diameter. I put 2.25" coil overs all round. If you go for wider arches then you can keep the wtock springs

Please Log in or Create an account to join the conversation.

Time to create page: 0.108 seconds

Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.