This is a public forum thread open to all users

anyone need chassis,floor or any other x19 panels?

More
13 years 9 months ago - 13 years 9 months ago #27709 by nick
ive just about taken everything i needed from this car,but as it was pretty clean and ive used non of the floorpan chassis or body panels,then it will all be getting weighed in as scrap unless anyone needs anything cut out of it to make a genuine repair on their own car?
both front floors had a small amount of grot,but everything else is virtually rust free,inc inner/outer sills,rear floors,chassis etc etc,let me know





by the way,just tell me which piece you need,pay the costs of my cutting discs and the postage,and il send it to you,alternativelly you can come cut it out yourself for free!!....theres also bits of trim and rear lights etc,non of it is any use to me and im not in the habit of stripping and storing so it will all be going in the bin....oh,the only part i do need is a decent throttle cable,(was in to much of a rush to cut the car in half and didnt realise mine was knackered before i cut that one to pieces),so if theres anything you want,and you have a decent cable,then it would be appreciated
Last edit: 13 years 9 months ago by nick.

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27710 by Michael Erskine
what are the front corners like the bits that are either side of the spoiler and are the back corners any good ????

michael

I have had that many Fiats they gave me a job selling them

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27711 by nick
the back corners,boot floor,inner wings,in fact everything in that area,as far as i can remember,is mint,the car had a thick coating of protection(not underseal!),so everything was pretty factory new,im afraid the front corners,if you mean the lower part with the big grommit and a wiring loom going through,are now a part of my own car as mine were rotted,ive also used both front and rear crossmembers on my own car,so they are missing as well,plus passenger front chassis leg in the arch section

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27712 by Michael Erskine
this is the bits required on both sides the red car is good but just in to show you the corner section I need.

thanks

michael

I have had that many Fiats they gave me a job selling them

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27713 by nick
i think you might be lucky micheal cos im pretty sure all those bits are pretty straight and usable,im not down there now til saturday(damn work gets in the way),but il have a proper look on sat and take some pics of the bits you need ok
The following user(s) said Thank You: Michael Erskine

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27734 by 1.8TS Sports
Nick,

Please could I have the middle engine support (mount) bracket?


Many Thanks, Ian

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27735 by Andrew Punter
Hi Nick where abouts are you?

Please Log in or Create an account to join the conversation.

More
13 years 9 months ago #27838 by 1.8TS Sports
Nick,

Have you still got bits available or have they all gone for scrap now?

Cheers,

Please Log in or Create an account to join the conversation.

More
13 years 8 months ago #28123 by Adam
Hi Nick. What is the panel that seperates the engine compartment from the boot compartment like, and is it still available? Its the bit that joins the two strut turrets together and holds the sounds deadening material between the boot and engine bay.

Thanks,

Adam

Please Log in or Create an account to join the conversation.

Time to create page: 0.192 seconds

Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.