Had a cracking day on the exy today. New pads, discs and brake hoses on the front, and i also welded in some new metal around the front wheel arch where LOTS of filler had once resided. All was going well until i replaced the brakes on the drivers side.Somebody had been there before but had managed to snap the eye on the hub where the caliper bolts go through :shock: .Bit of a bugg£r really as i had hoped to bleed it all through tommorow. Any body out there got an offside hub? 1500 1982.
Blimey that's an unusual one. There should be loads about, as most people have several cars including scrappers - unfortunately I didn't keep the ones off the car I scrapped as I thought I'd never need them...
If you don't get any offers, try the magazine advertisers. If you're in Gloucestershire, PIX2000 are close to you; otherwise any of the advertisers should be able to send you a secondhand one pronto. The other option is the other Fiat models that used these hubs, I'm pretty sure 127/128 hubs are the same and that may well have been carried through to Unos/Seat/Panda etc. I'd nip to a breakers with the old one in hand.
Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.
