Radiator Fan

I'm going to fit a second radiator fan and relay using the studs provided on the radiator.

Does anyone have a usable item??

Jack, i could help you out with one of my spares. Send me a PM Best Regards, Ian

PM'd. Thanks!

If your friend cannot help you out with a fan, I have one. It's already removed from rad, a I've checked it to make sure it's ok. Is the extra wiring already in place on the car for a second rad? If not, let me know as I'm going to scrap the car that I've been braking next week, and I could remove the wiring/solenoid/block connectors whatever you need.
Thanks TIM........mobile no 07775528959.

cheers. I haven't been able to check the car as it's at the garage just now. I won't be able to get a look until Thursday.
What exactly am i looking for beyond an extra connecter where the extra fan might go?

I'm not sure exactly myself. I'm not an X19 man myself, just picked this one up and advertised it for breaking on here. I recently removed the rad and fan. There was just the one double wired connector for the fan itself, this must be an earth and a feed from the relay. You can probably spur into the live on your existing fan relay, or fit a second one, or wire second fan into a switch on the dash. To keep wiring tidy, I can take off the wiring and you can use it , as it has the correct connector on the end.

Jack, PM sent.

Tim, The floor is yours as I don't need to sell my spare and you were kind enough to save the one you are breaking from the crusher.

As for the fitting there are a number of options. I have simply wired a hard switch / relay in on mine for over ride.

You can purchase something like this Electronic Thermostat

or the monte hospital sell this: twin rad fan switch

I'd still add a relay and direct fused feed.

Let me know if you need more info.